We are thrilled to offer for your kind consideration AGM F14 Fusion Night Vision Monocular which combines night vision and thermal imaging technologies together with image fusion mode in one amazing piece of consumer electronics!

The F14 monocular is a device that can bring your extreme hiking adventure totally to the next level. AGM F14 will be really helpful at night, in darkness, under extreme environments such as, fog, rain, snow, and literary everything you may meet on your way. AGM F14 may be used in caves or forests, when kayaking and even or especially on your favorite trail in mountains with Azimuth and Pitch/Inclination indication. Due to its waterproof capability the AGM F14 performs well even in the harshest weather conditions and will help you complete all your most daring challenges outdoors.

The AGM F14 can be equipped with high-performance image intensifier tubes and 12μm high-sensitivity thermal detector with 640x512 resolution. The F14 can be used as hand-held device or mounted on a head harness or directly onto the hiking helmet. The user-friendly interface, comfortable and ergonomic controls make the usage of the device incredibly simple and sometimes even absorbing.

AGM F14 offers different variants of image view: thermal, classic night vision, and enhanced fusion image of thermal and night vision that the user will absolutely love being in various environmental conditions. The F14 is also equipped with manual gain control, so the image brightness can be adjusted, providing the highest possible image quality especially in changing light conditions. The monocular uses two 18650 rechargeable Lithium battery in the external holder for up to 8-hours of operating time in fusion mode. In night vision mode device can run more than 60 hours.



  • Bi-spectrum image fusion and object highlight
  • Detail enhancement and target recognition
  • Selection of thermal view channel, I2 night vision channel, or both them combined with multiple fusion modes switchable
  • 12 μm, 640x512 high-sensitivity thermal detector
  • Digital zoom in thermal channel
  • Azimuth and Pitch/Inclination Indication
  • Brightness and contrast image adjustment
  • Extra large exit pupil diameter (15mm)
  • Low cower consumption. Up to 8 hours continuous running in fusion mode and more then 60 hours operation in I2 night vision mode
  • Aviation plug for external power supply and video output
  • Waterproof
  • 3-Year Warranty




    Battery holder | Helmet support | Battery holder interface with hook-loop support | 18650 rechargeable Lithium battery | Eye cup | Video cable | Operation manual | Packing case



Detector Type 12 μm VOx Uncooled Focal Plane Arrays
Resolution 640×512
Refresh Rate 50 Hz
Response Waveband 8 μm to 14 μm
Thermal Lens Focal Length 16 mm
Thermal Field of View (HxV) 25.8° × 19.1°
Digital Zoom 1x, 2x, 4x, 8x
Observation Distance 1,500 m (human detection)
Flat Field Correction (FFC) Manual
Palettes White Hot/Black Hot/Orange Hot, Outline, Highlighting, Thermal Image, Breath
Video Output Yes (via aviation plug)
I2 Night Vision Sensor Gen 2+ or Gen 3 Image Intensifier Tube
I2 Night Vision Module Manual Gain Control Yes
I2 Night Vision Module Lens Focal Length 25 mm
I2 Night Vision Module Field of View 40°
Optical Magnification 1x
Diopter Adjustment -3.5 to +2.5 dpt
Exit Pupil Diameter 15 mm
Eye Relief 25 mm
Bright Light Cut-Off Yes
Infrared Illuminator Yes
Battery Type Two 18650 rechargeable battery (external battery holder)
Battery Operating Time More then 8 hours continuous running (fusion image mode) More then 60 hours continuous running (I2 night vision only)
Battery Capacity Display Yes
External Power 5 VDC/2 A (via aviation plug)
Working Temperature -40°C to 60°C (-40°F to 140°F)
Protection Level IP67 (Waterproof)
Dimensions 100 × 71 × 86 mm (3.9 × 2.8 × 3.4 in)
Weight (w/o batteries) 380 g (0.84 Ib)
Package Includes Monocular, Battery Holder, Two 18650 Lithium Batteries, Helmet Support Kit, Video Cable, Hard Carrying Case, User Manual



*PAY ATTENTION! This product requires an export license outside the Benelux. We take care of this with the Customs in the Netherlands. The customer only needs to sign an End-Use Statement for the application.*